lead time:
30 working days after receiving depositproduct orgin:
Chinabrand:
RONGWINshipping port:
Shanghaipayment:
TT, L/C, WEST UN, MONEY GRAMprice:
$30000/Setmarket price:
$50000color:
As your requirementRONGWIN WF67K-M Series High-Speed Energy-Saving Dual Servo Pump Hybrid CNC Press Brake
SVP Dual Servo Pump System Core Configuration: 2 × High-Response Main AC Servo Motors + 2 × Dedicated Digital Servo Drives，2 × High-Precision Internal Gear Hydraulic Pumps，2 × Independent Stainless Steel Oil Reservoirs，2 × Integrated Proportional Synchronization Valve Blocks，2 × Normally Open (N.O.) Pre-Fill Valves
SVP Dual Servo Pump System | RONGWIN WF67K-M Series Hybrid CNC Press Brake
The SVP system utilizes high-response AC servo motors to directly drive the hydraulic pumps. Hydraulic pressure and cylinder operating speed are dynamically modulated in real time by adjusting the servo motor RPM and pump displacement. High-precision displacement sensors provide continuous closed-loop feedback, ensuring dynamic ram speed regulation and micron-level piston positioning accuracy throughout the entire bending cycle.
RONGWIN WF67K-M series Fast Speed Energy-saving Servo Pump Control Hybrid CNC Press Brake SVP System Featuers
• Energy-Saving: Cuts electricity consumption by up to 70% compared to traditional hydraulic drives.
• High Efficiency: Boosts overall productivity by 30% with significantly shorter bending cycle times.
• High Precision: Exceptional ram positioning and repeatability accuracy down to ±5 \mum±5 \mum (±0.005 mm±0.005 mm).
• Ultra-Quiet: Substantially lowers operating noise for a quieter, more ergonomic workshop environment.
• Less Oil: Requires only 20% of traditional hydraulic oil volume (80% oil reduction), lowering maintenance overhead.
• Easy & Fast: Streamlined modular architecture allows for easier manufacturing, faster commissioning, and effortless maintenance.
• Significant Energy & CO₂ Reduction: Drastically lowers electricity consumption and heat generation, significantly reducing your factory's carbon footprint.
• Lower Installed Power Capacity: The servo motor's high instantaneous overload capability reduces overall grid connection and transformer capacity requirements.
• 70% Less Hydraulic Oil: Compact tank design requires only 30% of conventional hydraulic oil volume, cutting fluid replacement and disposal costs.
• Eliminates Oil Chiller Needs: Because the hydraulic system operates near room temperature, active oil chillers are reduced or eliminated, significantly extending hydraulic oil and seal lifespan.
• Ultra-Low Noise Operation: Greatly dampens operating noise during non-working and bending cycles, creating a quieter, safer working environment for operators.
RONGWIN WF67K-M series Fast Speed Energy-saving Servo Pump Control Hybrid CNC Press Brake Controller and Backgauge
RONGWIN WF67K-M series Fast Speed Energy-saving Servo Pump Control Hybrid CNC Press Brake Parameters
previous : RONGWIN WF67K-C Series Energy-saving High-efficiency Servo Pump CNC Press Brake
next : Rongwin New Sheet Metal Bending Machine CNC Panel Bender Hot Sale Sheet Bender for Kitchen Cabinet
Manual type Normal Press Brake
This Normal Press Brake is used to bending metal, this machine is without NC or CNC controller, this machine has motorized back gauge and motorized Y axis function.
read more
CNC Hydraulic Press Brake for metal sheet
The Synchro CNC Press Brake use state-of- the-art hydraulics (Bosch-Rexroth or Hoerbiger) and electronics (Telemecanique, Merlin Gerin Legrand, Siemens) to ensure accurate control of the bending process.
read more
200T NC Sheet Metal Hydraulic Press Brake Machine
Our NC Press Brake Machine has NC controller, our machine tonnage range is from 30Ton-600Ton , The Press Brake standard working length is from 1.3 meters to 6 meters, The bending metal thickness is upto 20mm thickness . We can use ESTUN brand E21 NC controller, also we can use Germany ELGO NC controller.
read more
CNC Hydraulic Torsion Servo Metal Sheet Folding Machine
The CNC Folding Machine has advanced technology and reliable performance, which makes it ideal equipment for sheet forming. It is widely used in many industries, such as plane, automobile, ship, electronics, machinery and light industry, with high production efficiency.
read more
WF67K-C Series CNC Press Brake with Servo Pump
WF67K-C Large CNC Hydraulic Press Brake- Electro-hydraulic servo system cuts energy use by 30%,extends oil life, and ensures precision, speed control, and eco-friendly efficiency.
read more
WF67K -C Series SVP One-way Servo Pump Control CNC Press Brake
RONGWIN brand WF67K -C Series SVP One-way Servo Pump Control CNC Press Brake is a multi-functional, fully automatic, high-performance machine. It can not only meet the needs of customers in all aspects, but also save energy and environmental protection, which is deeply loved by customers.
read more
copyright © 2026 Nanjing Rongwin Machinery Technology Co.,Ltd.all rights reserved.
the professional team to service !
0086-(0)25-57226860
info@rongwin.com
